150W 12V LED Remote Electronic Transformer | Tech Lighting

Tech Lighting 150W 12V LED Remote Electronic Transformer

This remote electronic transformer converts standard 120 volt line-voltage to 12 volts, providing the necessary voltage for powering a MonoRail, Kable Lite, Wall MonoRail or FreeJack low-voltage lighting system. This remote electronic transformer can be used to power lamps totaling up to 150 watts. This transformer is equipped with fast-acting short circuit and overload protection that will safely turn off the system should a short occur. Once the short is removed, the unit can be reset by simply flipping the wall switch off and back on.

Installation
This transformer must be installed in a remote but accessible location (such as above the ceiling or in a closet). To simplify installation the transformer should be located no more than 20 feet from the run or power feed. The electrician will need to supply the proper gauge conductor from the transformer to the power feed location based on distance.

NOTES
Input Wiring: Can be ordered to hard wire to a junction box or plug in with 16' power cord with plug. This transformer provides 1 x 150W output and must be used with a single feed canopy or other power feed option (sold separately). 12V output transformers require the use of 12V lamps.

Dimension
16" W x 10" H

Shipping
If in stock, item ships in 3 to 7 business days.

Certification
ETL Listed

Item Code
700AT152EL

Return Policy
All sales are final, and not eligible for return. We accept returns for exchange for items damaged in transit, or if the item is defective.