Nora Lighting 4" Marquise II, IC Air-Tight Remodel Housing
Dedicated new construction housing for installation in NonIC or insulated ceilings, must specify. Air-tight construction provides energy savings by reducing the flow of air through the ceiling.
CONSTRUCTIONPlaster Frame: 0.040 steel frame with integral bar hanger brackets. Brackets can accommodate longer 27ï¾” accessory flat bar hangers. Brackets run along all sides of frame to allow bar hangers to be run parallel or perpendicular to junction box.
Housing: 0.040 aluminum one-piece can. Adjustable ceiling thickness from 3/8ï¾” to 7/8ï¾”.
Air Flow Restriction: Housing has factory installed gaskets to restrict airflow from room into ceiling plenum to <2CFM (cubic feet per minute) in accordance with ASTM283 Air-Tight requirements.
Bar Hangers: Two 13-3/4ï¾” to 24-1/2ï¾” adjustable bar hangers with captive nails are included on frame. Bar hangers are parallel to junction box, but can be repositioned 90ï¾º perpendicular to junction box if desired. ï¾“Lï¾” Shaped bar hanger foot to align to bottom of construction joist. A T-Bar notch allow for easy installation in a suspended ceiling.
Junction Box: Prewired 25 cubic inch 0.064ï¾” thick galvanized steel, with seven 1/2ï¾” knockouts, four Romex® pryouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in, 4-out).
CLEARANCENon-IC: Non-Insulated housings require a minimum clearance of 3ï¾” from thermal insulation and 1/2ï¾” from adjacent building components.IC: Insulated ceiling housings are direct contact rated; no minimum clearance is required.
ElectricalInput Voltage: 120V or 277VLumens / Wattage:NHMIC2-409 = 900lm / 15WOperating Temp.: 0ï¾°C to 45ï¾°C ambient temperatureDimmingLE3: 120V Input; Triac/ELV/0-10V dimmingLE6: 120-277V Input; 0-10V dimming
Emergency LED DriverEM - Emergency Pack w/ Remote Test Switch
Labels and listingsï¾· cULus Listed for Damp Location w/ Feed Throughï¾· cULus Wet Listed (Only with designated trims)ï¾· Meets or exceeds ASTM-283 Air-Tight Requirements